1W Amber Orange LED (595-610nm)
1W Amber/Orange high power LED for soldering to printed circuit board. This 1W LED uses a 38 Mil EPILED chip achieving a powerful orange/amber beam peaking between 595-610nm and with 120° beam lens.
A very popular choice for inclusion in LED grow lights, automotive and signalling applications, this LED boasts an impressive 60 lumens when driven at maximum power. Due to the superior build quality and high specification of the EPILED chips this component retains an excellent level of efficiency even at higher drive currents.
Please note that all power LEDs should be mounted onto an aluminium or copper heat sink with a thermal compound or glue used between the rear of the LED and the heat sink surface. This thermal transfer is crucial to attain optimal optical performance, efficiency and a complete lifespan in any LED application. Given that overheating can cause a decrease in light output active cooling is highly recommended particularly at higher drive currents.
For convenience the general electrical and optical characteristics are listed below. For full manufacturers specification please consult the datasheet provided here.
If you require further help, please feel free to contact us as any time and our UK staff will be happy to help.
Please note these LEDs are intended for mounting onto a PCB for correct operation and not directly to a heat sink. If you need to site these LED individually or directly onto a heat sink, please view our LEDs that come pre-mounted on aluminium star PCBs here.
Relative Spectral Power Distribution
Electrical and Optical Characteristics at IF=400mA and Ta=25°C
|Thermal Resistance||Rθ J-B||~||12||~||°C/W|
Absolute Maximum Ratings
|ESD Sensitivity||~||+/- 2,000 V HBM||~|
|Temperature Coefficient of voltage||~||-5||mV/ °C
|DC Pulse Current(@ 1 KHz,10% duty cycle)||IFP||1000||mA|
|Reverse Voltage||VR||No reverse operation|