3W violet high power LED attached to a 19.8mm x 1.6mm star PCB. This high luminance LED uses a 45 Mil EPILED brand name chip, producing a pure 120° purple beam, with a wavelength peaking between 410-420nm.
Fantastic for use in aquariums, horticultural and architectural lighting this diode produces up to 30 lumens when driven at maximum power, yet retains a high level of efficiency even at higher currents.
As with all high power LEDs this component must be mounted onto an aluminium or copper heat sink with a thermal glue/compound between the rear of the PCB used and the heat sink surface. This is crucial to attain optimal performance, efficiency and lifespan in any LED application. Active fan cooling is highly recommended particularly at higher drive currents.
For convenience the general electrical and optical characteristics are listed below. For full manufacturers specification please consult the datasheet provided here.
If you require further information, please feel free to contact us as any time and our UK staff will be happy to help.
Spectral Power Distribution
Electrical and Optical Characteristics at IF=750mA and Ta=25°C
|Thermal Resistance||Rθ J-B||~||12||~||°C/W|
Absolute Maximum Ratings
|ESD Sensitivity||~||+/- 2,000 V HBM||~|
|Temperature Coefficient of voltage||~||-5||mV/ °C
|DC Pulse Current(@ 1 KHz,10% duty cycle)||IFP||1000||mA|
|Reverse Voltage||VR||No reverse operation|