10W Bright Red LED (EPILED 630nm)

10 Watt High Power Bright Red LED COB (circuit on board). This high luminance LED uses a 10 x 42 Mil EPILED brand name chips, producing an intense bright red light 120° beam.
Popular for use in aquatic, grow lights and stage lighting, this versatile and powerful LED produces and impressive 230 lumens when driven at maximum power, yet retains a high level of efficiency even at higher currents.
Please note that all high power LEDs must be mounted onto an aluminium or copper heat sink with a thermal glue/compound between the rear LED and the heat sink surface. This is crucial to attain optimal performance, efficiency and lifespan in any LED application. Active fan cooling is highly recommended at higher drive currents.
For convenience the general electrical and optical characteristics are listed below. For full manufacturers' specification please consult the datasheet provided here.
If you require further information, please feel free to contact us as any time and our UK staff will be happy to help.
____________________________________________________________________________________________________________________________
Spectral Power Distribution
Electrical and Optical Characteristics at IF=800mA and Ta=25°C
Parameter | Symbol | Min | Typical | Max | Units |
Luminous Flux | φv | 400 | ~ | 600 | lm |
Wavelength | λD | 620 | ~ | 630 | nm |
Forward Voltage | VF | 10 | ~ | 13 | V |
Power Dissipation | PD | 8.0 | ~ | 10.4 | W |
View Angle | 2θ1/2 | ~ | 120 | ~ | deg |
Thermal Resistance | Rθ J-B | ~ | 1.2 | ~ | °C/W |
Absolute Maximum Ratings
Parameter | Symbol | Value | Unit |
Forward Current | If | 800 | mA |
Junction Temperature | Tj | 115 | °C |
Operating Temperature | Topr | -40~+60 | °C |
Storage Temperature | Tstg | 0~+60 | °C |
ESD Sensitivity | ~ | +/- 2,000 V HBM | ~ |
Temperature Coefficient of voltage | ~ | -5 | mV/ °C |
DC Pulse Current(@ 1 KHz,10% duty cycle) | IFP | 1000 | mA |
Reverse Voltage | VR | No reverse operation |