3W Emerald Green LED (EPILED 520-530nm)
3W Emerald Green LED for soldering to PCB (printed Circuit board). This 3W LED uses a 45 Mil EPILED chip achieving a powerful pure green light peaking between 520-530nm. As with all our LEDs this LED comes fit with a 120° beam lens.
Popular for use in aquatic, horticultural and stage lighting applications, this versatile and powerful LED boasts an impressive 120 lumens of when driven at maximum power. Due to the superior build quality and high specification of the EPIELD chips these 3W LEDs retain an excellent level of efficiency even at higher drive currents.
As with all high power LEDs this component must be mounted onto an aluminium or copper heat sink with a thermal glue/compound between the rear of the PCB and the heat sink surface. This is crucial to attain optimal performance, efficiency and lifespan in any LED application. Active fan cooling is highly recommended particularly at higher drive currents.
For convenience the general electrical and optical characteristics are listed below. For full manufacturers specification please consult the datasheet provided here.
If you need further information please feel free to contact us as any time and our UK staff will be happy to help.
Please note these LEDs are intended for mounting onto a PCB (printed circuit board) for correct operation. If you need to site these LED individually or need flexibility in your array, we recommend viewing our LEDs that come pre-mounted onto aluminium star PCBs here.
Spectral Power Distribution
Electrical and Optical Characteristics at IF=750mA and Ta=25°C
|Thermal Resistance||Rθ J-B||~||12||~||°C/W|
Absolute Maximum Ratings
|ESD Sensitivity||~||+/- 2,000 V HBM||~|
|Temperature Coefficient of voltage||~||-5||mV/ °C
|DC Pulse Current(@ 1 KHz,10% duty cycle)||IFP||1000||mA|
|Reverse Voltage||VR||No reverse operation|