Amber Power LED (EPILED 595-610nm) - 800mA
3W Amber/Orange high power LED attached to a 19.8mm x 1.6mm star PCB. This high quality 1W LED uses a 38 Mil EPILED chip achieving a powerful orange/amber beam peaking between 595-610nm and with a beam angle of 120°.
Popular for use in aquariums, flowering grow lights and especially automotive lighting, this versatile and powerful LED produces an impressive 80 lumens when driven at maximum power. Due to the superior build quality and high specification of the EPILED chips these 3W LEDs retain an excellent level of efficiency even at higher drive currents.
Please kindly note that all power LEDs should be mounted onto an aluminium or copper heat sink with a thermal glue/compound between the rear LED and the heat sink surface. This thermal transfer is crucial to achieve optimal efficiency, performance and complete lifespan. As over-heating can cause a drop in light output active fan cooling is highly recommended particularly at higher drive currents.
For convenience the general electrical and optical characteristics are listed below. For full manufacturers specification please consult the datasheet provided here.
If you require further information, please feel free to contact us as any time and our UK staff will be happy to help.
Spectral Power Distribution
Electrical and Optical Characteristics at IF=800mA and Ta=25°C
|Thermal Resistance||Rθ J-B||~||12||~||°C/W|
Absolute Maximum Ratings
|ESD Sensitivity||~||+/- 2,000 V HBM||~|
|Temperature Coefficient of voltage||~||-5||mV/ °C
|DC Pulse Current(@ 1 KHz,10% duty cycle)||IFP||1000||mA|
|Reverse Voltage||VR||No reverse operation|